---------------------------------------------------------- AeroElectric-List Digest Archive ---...

---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Sat 10/20/07: 21 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:11 AM - Re: Fiber Washer (Peter Mather) 2.

http://www.matronics.com/digest/aeroelectric-list/Digest.AeroElectric-List.2007-10-20.txt

•74 The Industry for which the spinner is designed. These segments are drilled and cut in...

www.flightglobal.com

•74 The Industry for which the spinner is designed. These segments are drilled and cut in conjunction with the back plate and locking ring that are attached to the back ol the airscrew hub. .

http://www.flightglobal.com/FlightPDFArchive/1939/1939-1-%20-%200226.PDF

JohnnyPopper Forums -> "g" Fanshaft Questions

OK , when putting on the machined fit inner race and fanshaft gear onto the shaft,do you have everthing jammed-up to the shaft end or to the snap ring.There seems to be a 1/16th slack either way. After we get the above "put to bed"..............

http://www.johnnypopper.com/forums/index.php?act=ST&f=1&t=13452&s=bbaa08a32f5aa13325193e9cc14b82cb

1939 | 1- - 0226 | Flight Archive

www.flightglobal.com

•74 The Industry for which the spinner is designed. These segments are drilled and cut in con junction with the back plate and locking ring that are attached to the back ol the airscrew hub. . S

http://www.flightglobal.com/pdfarchive/view/1939/1939-1-%20-%200226.html