B607 Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use has been reapproved, available as B607-91(2008)

www.astm.org

...Coatings B656 Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for...and Service Environments AMS 2399 Electroless Nickel-Boron Plating AMS 2433 Electroless Nickel-Thallium-Boron Plating MIL...

http://www.astm.org/Standards/B607.htm

Electroless nickel plating - Component Technologies, Inc.

...the following plating processes: CTI Electroless Nickel CTI Hard Electroless Nickel CTI Sulfamate Plating CTI Tin Plating- Electrolytic & Immersion CTI Electroless Nickel/PTFE (Teflon) CTI Electroless Boron...

http://www.componenttechnologiesinc.com/

Electroless Plating - Elsevier

www.elsevier.com

...surface finishing industries. Contents 1. The Fundamental Aspects of Electroless Nickel Plating The Electroless Nickel Plating Bath: Components 2. The Electroless Nickel Plating Bath: Effect of Variables on the Process Electroless Nickel...

http://www.elsevier.com/wps/find/bookaudience.cws_home/715957/description

March 16, 2009: IPC’s Collegiate Challenge — Road to the Final … Three, Academic Posters Compete at IPC APEX EXPO™

www.ipc.org

...Temperature Sintering of Ag Nanoparticle Paste by Chemical Dip Treatment Daisuke Wakuda, Osaka University Selective Electroless Nickel and Gold Plating of Individual Integrated Circuits for Gold Stud Bump Flip-Chip Attachment David Lee, Johns...

http://www.ipc.org/ContentPage.aspx?pageid=IPCs-Collegiate-Challenge-Road-to-the-Final

Bump Adapters fit any BGA device on 0.40 mm pitch board.

news.thomasnet.com | Nov 19, 2009

...370 HR, with 1/2 oz. copper traces on both sides. The non-solder mask defined (NSMD) pads are finished with electroless nickel immersion gold (ENIG). The apparatus can operate up to 221°F (105°C) for FR4 and 266°F (130°C) for...

http://news.thomasnet.com/fullstory/568828

Inserta®'s Electroless Nickel-Plated Ball Valves

www.designnews.com | Sep 17, 2009

...News Staff Inserta®'s Electroless Nickel-Plated Ball Valves September...available with an optional Electroless Nickel Plating of all exterior surfaces...challenging environments. Electroless Nickel Plating offers significant...

http://www.designnews.com/blog/From_the_Newswire/23185-Inserta_s_Electroless_Nickel_Plated_Ball_Valves.php

Changes in Laminates Heat Up

www.ipc.org | Nov 16, 2009

...surface finishes. Material costs have changed significantly in recent years, changing some of the tradeoffs. “Electroless nickel immersion gold is easy to put on and it works well with solder paste. It’s a good way to go, but it’s...

http://www.ipc.org/imaginationarticle.aspx?aid=Reliability-for-hi-rel-military-boards

Aries’ New Fine Pitch Bump Adapters Adapt BGA Devices of Any Pitch to 0.40 mm Pitch Boards

www.edn.com

...HR, with 1/2 oz. copper traces on both sides. The non-solder mask defined (NSMD) pads are finished with electroless nickel immersion gold (ENIG). The apparatus can operate up to 221°F (105°C) for FR4 and 266°F (130°C) for...

http://www.edn.com/pressRelease/2140483358.html