SFS intec Low Profile Hex Head Fastener Eases Off-Site Frame Construction

rss.feedsportal.com | Jun 10, 2008

With an ever growing demand for Off-Site construction, SFS intec have launched the SD-LH range of self-drilling fasteners. The versatile fixings have low profile hex heads which ensure easy over attachment of wall boards and insulation panels.

http://rss.feedsportal.com/c/310/f/4382/s/13d2089/story01.htm

SFS Fixes it for Corus

www.wnibi.com | Mar 19, 2007

The MSM Automated Distribution Centre (ADC) site outside Scunthorpe is Corus Construction and Industry’s (CC&I) latest storage and handling facility, and is designed to take large quantities of bundled steel sections hot from the rolling mill.

http://www.wnibi.com/Pages/StoryDetail.aspx?ArticleId=6047

Framing system eliminates field welds

www.plantengineering.com | Jan 1, 2000

Long Bay System (LBS) is an innovative framing system that combines the best of conventional construction with metal building system design.

http://www.plantengineering.com/article/CA129751.html

SFS intec best practice training video Podcasts: News from SFS intec

Product category: Structural Fixings and Fasteners News Release from: SFS intec | Subject: Best practice training video Podcasts Edited by the Buildingtalk Editorial Team on 11 July 2008

http://www.buildingtalk.com/news/sfs/sfs175.html

C.F.T.ltd

Formed in 1985, CFT ltd was destined to become a major force in the supply of self drilling fasteners, even in the early days supply of fixings for major contracts were being won.

http://cftltd.tripod.com/

DSD Buildings Ltd - Insulation - Page 13 - Kellysearch.co.uk B2B Online Product Catalogues

www.kellysearch.co.uk

Robust Details Internal Corner Sealed using 9 x 3mm strip sealant, laid continuously to ensure air tightness External Corner Sealed using 10 x 5mm PE foam tape, laid continuously to ensure air tightness Internal flashing slitched to underside of the panel using rivets at a minimum of 400mm centres. Sealed using 10 x 5mm PE foam tape, continuously laid to ensure air lightness Internal corner Hashing butt or ap jointed with two continuous beads of high performance Flashing to be stitched usin Primary fastener, 5.5mm diameter self drilling austenitic S.S high thread fastener with sealing washer sealed rivets or self drilling no oreater than 450mm centre nternal corner fashing stitched to underside of the rivets at a minimum of 400mm centres. Sealed to panels using 10 x 5mm PE foam tape, continuously laid to ensure air tightness Flashing to be stitched using sealed rivets or self drilling fasteners with sealing washers no greater than 450

http://www.kellysearch.co.uk/CatalogView.aspx?c=6544956&cn=1&b=KBD&l=6544956&cc=gb&v=0&i=13

Fastener Usage

To obtain maximum performance from the self-drilling fastener, drivers that have been developed and approved for them should be used. These drivers must turn at 1900 to 2500 RPM and be rated at 4 Amps or higher. Drivers must be equiped with a positive clutch and a depth-locating nose piece.

http://www.garcobuildings.com/design-specs/details/panel-fastener/sht37-fastener-usage-640.htm

GA Fixings | Self Drilling / Tapping Screws

www.gafixings.com

GA fixings manufacture a range of Masonry Support Systems, Brickwork Support Systems, Wall Ties, Windposts, Parapet Posts, Lintels, Channels, Anchors and Other Masonry Fixings.

http://www.gafixings.com/selfdrillingscrews.htm