Promat International Asia Pacific

®-60. The designer must determine the suitability of the design to the application and requirements before undertaking or constructing any works relating to the specifications and where in doubt should obtain the advice of a suitably qualified engineer.

http://www.bccweb.com/partition_PMFsstud_1layer-as.htm

05/4265i1.qxd

www.rollalong.co.uk

Readers are advised to check the validity of this Certificate by either referring to the BBA’s website (www.bbacerts.co.uk) or contacting the BBA direct (Telephone Hotline 01923 665400).

http://www.rollalong.co.uk/4265i1_web_BBA_Certificate.pdf

Page 2

There are two basic types AB (pointed and formerly known a type A) and type B which is blunt. Type AB is ideal for joining thin sheets but can also be used for zinc and aluminium die castings. Type B is designed for use in heavier gauge sheet steel and structural steel sections.

http://www.ashtonbolt.com/page2.htm

Special Products

Special fasteners will be made to a drawing and a specification so provide us with as much information as possible. The application is also useful as this might influence the manufacturing process.

http://www.socket-allied.com/products_specials.asp