Featured Suppliers:

Now that the frame is even with the face of the case, Tommy can attach the crown molding. Wax is placed on the frame, the ends of the molding have been cut to fit, a little glue is applied and Tommy crosses his fingers hoping everything will work out.

http://www.bobvila.com/RoughCutShow/Podcast_67.html

T Chisel - The Rough Cut Show! Podcasting to the serious woodworker.

Tommy has dropped off the top of the secretary to the finisher in Salem, and it's time to work on the lower half. He reviews the plans for the base molding and, using a mockup, shows how everything will fit together.

http://www.bobvila.com/RoughCutShow/Podcast_102.html

T Chisel - The Rough Cut Show! Podcasting to the serious woodworker.

All the dentil molding is on and now it's time to add another layer. Tommy shows how the applied dentil molding looks and how the soffit and quarter round fit over it. He then attaches them to the case. Tommy cleans up the dentil molding with a chisel so it is flush with the quarter round.

http://www.bobvila.com/RoughCutShow/Podcast_70.html

T Chisel - The Rough Cut Show! Podcasting to the serious woodworker.

With the fretwork completed, it's time to start the next layer of molding: the cove. Tommy reviews the miters and suggests using a lot of stock when doing this type of work. Tommy then shows how to cut dentil molding and demonstrates its placement on the secretary.

http://www.bobvila.com/RoughCutShow/Podcast_69.html