ebuild: New tap 22mm

I have bought a new bath mixer tap http://www.buyplumbing.co.uk/VEM-PI900006CP It has 22mm connections from hot and cold. I never thought before buying, but will this connect ok from a new combi boiler?

http://www.ebuild.co.uk/forums/messages/771/16098.html?1200512130

Plumber with a sense of humour - General Construction Discussion Forum - Contract Journal - Construction Space

Forum  |  www.contractjournal.com | Mar 4, 2009

Plumber with a sense of humour ǂ 03-04-2009 15:53 ǂ Dazzler ǂ Top 75 Contributor ǂ Plumber with a sense of humour ǂ Well it made me chuckle. ǂ Page 1 of 1 (1 items)

http://www.contractjournal.com/constructionspace/forums/plumber-with-a-sense-of-humour-818.aspx

Plumbing problem expert advice needed - Irish Architecture Planning Forums

A friend of mine called me last night to see if my handyman knowledge could fix his leaky pipe. Here's the problem. Under his floor are the 28mm copper pipes for the heating boiler. At one place there are 90 degree soldered elbows. The pipes run almost touching each other.

http://www.archiseek.com/content/showthread.php?s=2dc7f3f83053c3ebe759c98d211cb7f8&t=7246

Community Forums: Tilers' Talk

Your search results are shown below. You can filter your results by Forum, Date Range, or Username.

http://www.screwfix.com/talk/search!default.jspa?forumID=35

Archinect : Discussion Forum : General Discussion : plumbing problems

Space station crew to NASA: Send plumber soon WASHINGTON (AP) The international space station's lone toilet is broken, leaving the crew with almost nowhere to go. So NASA may order an in-orbit plumbing service call when space shuttle Discovery visits next week.

http://www.archinect.com/forum/threads.php?id=75646_0_42_50_C154

ebuild: 8mm ok for hot and cold supply?

Hi, looking for some advice. My flat has a mix of 22mm and 15mm for hot and cold water supply. 8mm (microbore?) has been used for central heating radiators because it is crossing so many joists.

http://www.ebuild.co.uk/forums/messages/771/16086.html?1200654919

Hugh Grant's plumber blasts Alan Sugar's apprenticeship scheme - General Construction Discussion Forum - Contract Journal - Construction Space

Forum  |  www.contractjournal.com | Aug 25, 2009

" Hugh Grant's plumber has slated the Government's apprenticeship scheme fronted by Sir Alan Sugar. The managing director of Pimlico Plumbers

http://www.contractjournal.com/constructionspace/forums/hugh-grants-plumber-blasts-alan-sugars-2343.aspx

ebuild: Log boilers + accumulator tanks

Has anyone fitted a system based around a wood fired boiler which heats an accumulator tank? I am having trouble finding any local plumbers who've fitted similar equipment. I would be very interested if anyone had any ideas about the design of such a system.

http://www.ebuild.co.uk/forums/messages/771/15160.html?1195600930

ebuild: Leaking rad valve

Hi lads, Need a bit of help i have a rad that is leaking on the valve bit where you turn it on its not a TRV just a standard twist on/off type one. Just wondering how much roughly a plumber would charge to do it?

http://www.ebuild.co.uk/forums/messages/771/16619.html?1203890603

ebuild: PolyFit/PolyPlumb compatibility with Hepworth

I would recommend using a compression fitting for the join between the two and then using all the same make fittings from there. Have you looked at Marly Equator pipe, it's one of the best (IMHO). Andy.

http://www.ebuild.co.uk/forums/messages/771/17377.html?1207265727