Sporton International Inc. now certified for measurements of over-the-air (OTA) performance with Rohde Schwarz test system

Forum  |  www.wimaxforum.org | Jun 17, 2008

The test house Sporton International Inc. (Neihu District, Taiwan) was recently certified by the CTIA and the Wi-Fi Alliance as a CATL for tests using the Ramp;S TS8991 test system in accordance with the current Test Plan for Mobile Station Over the Air (OTA) Performance and for RF Performance

http://www.wimaxforum.org/news/pr/view?item_key=bd1509ad82ce2fa0150e9fdb64f7e8232736d730

anatekcorp.com • View topic - Blue ESR meter tips

Forum rules All posts must be on topic: Discussion of AnaTek products. No foul language, personal attacks, name calling will be tolerated. The moderator will be the final judge.

http://www.anatekcorp.com/forum/viewtopic.php?f=3&t=3&start=0&sid=bad0f7ae041daabb87b00061ebeabf91

Amount of testing - ClinPlus Forums

We are curious as to how much testing our clients do with our products once they are in house? 1) Do you perform IQ (Installation Qualification), OQ (Operational Qualification) and PQ (Performance Qualification)?

http://www.clinplus.com/vboard/showthread.php?p=236

Waterinjection :: View topic - Installation and first system testing

I have a system 2c with a Race spec pump - bought second hand. I've wired everything up and now want to check that the pump pumps water under pressure properly. To begin I just connected the 1 and 3 inputs to the pump to 12V + and -.

http://www.aquamist.co.uk/phpBB2/viewtopic.php?t=1677&view=next&sid=5430f549054bf70a1f4d294bd8d0d3ba

www.aspenres.com • View topic - System test & equity curve

Position(series,mode=1,system=1)={ buy = 0 sell = 0 if system==1 then begin if ($1.close > wavg($1,20) and $1.close[1] < wavg($1,20)[1]) then buy = 1 if ($1.close < wavg($1,20) and $1.

http://www.aspenres.com/forums/viewtopic.php?f=3&p=138&sid=d32bd8ea17c5af85fd28cdc85add91fc

Alternative PCB Test and Repair Cost Model

It is evident that the SMT process affects the results at testing, hence I thought this was relevant to this forum. An alternative to the NEMI (National Electronics Manufacturing Initiative) PCB test cost model (see http://www.nemi.org/newsroom/PR/2003/cost_model.html) is available for free.

http://www.smtnet.com/forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=6234&

Waterinjection :: View topic - Problem with test of 1s system - advice required please

Hi guys I've got a 1s system that I bought of my friend ages ago and am just trying to test it out now before I start drilling things on my car! Now I know it worked fine when it was on his car but it was removed quite a while before I bought it from him.

http://www.aquamist.co.uk/phpBB2/viewtopic.php?t=1655&view=next&sid=881948d2eb6e87a18047f2d8a0d9ed21

PCB Test and Troubleshooting Rates

We recently sent some PCB assemblies along with the schematics to a test services provider. Afer paying for the NRE tooling charges we were paying $75.00 per hour for the service providers Level 1 test technicians. Does this sound like a fair rate (we are in the Midwest) Regards BWET (http://www.

http://www.smtnet.com/forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=12701&

PCB lamination issues

1. After reflow some boards start producing bumps/bubbles which damage the internal layers causeing PCBs failed in Electrical-testing. How can I eradicate this problem from my assembling process? 2. If SMT components are mounted on non-rigid FLEX PCBs, how it can be soldered? 3.Reflow oven Spec.

http://www.smtnet.com/forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=11406&

PCB's for lead free testing

We are performing testing for lead free connector finishes. We want to run solderability tests on a series of lead free connector plating options in a series lead free PCB's. I need some advice on the most popular lead free PCB finishes. I am aware of immersion silver, electroless gold and OSP.

http://www.smtnet.com/forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=8133&