Whitepapers
Whitepaper QDR SRAM and RLDRAM A Comparative Analysis : Electronics News from ElectronicSpecifier
Whitepaper - QDR SRAM and RLDRAM: A Comparative Analysis : Electronics News from Electronic Specifier
TechOnline | QDR II SRAM Interface for Virtex-4 Devices
This application note describes the implementation and timing details of a two-word or four-word burst Quad Data Rate (QDR II) SRAM interface for Virtex-4 devices. The synthesizable reference design
TechOnline | Why Maxim/Dallas Chose to Design the Single-Piece NV SRAM Modules
Since the beginning of NV SRAM development, the intent has been to produce a hybrid memory product that could be handled exactly like an IC. Use of a commodity low-power SRAM with a lithium coin-cell battery mated CMOS wafer technology with a common, voltage-stable source for long-term memory
TechOnline | Using Data Pointers to Read/Write to SRAM
The MAXQ-based microcontroller uses data pointers to read and write to SRAM. This application note describes how to move data from program memory to the SRAM, and how to access the data from SRAM using the data pointers.
TechOnline | Designing Drop-in Pseudo-Static Memories
Pseudo-static memories are designed to drop into the socket of a static random access memory (SRAM) even though the internal memory operation is not static. Two commercially available pseudo-static memories are PSRAM (pseudo-static RAM) and FRAM (ferroelectric random access memory). PSRAM targets
Page:
