Whitepapers
TechOnline | Advances in SMT Backplane Connectors
With recent gains by semi-conductor manufacturers resulting in the widespread availability of devices capable of driving high-speed signals over longer printed circuit board (PCB) traces, system designers are presently considering product designs that have data rates up to 25 Gb/s. This requirement
Microsoft Word - Connector Bags rel Web.doc
Connector bags from 3M ease spring contact handling.
PICMG_3.2_ATCA_WP_130.fm
Mellanox Technologies Inc. 2900 Stender Way, Santa Clara, CA 95054 Tel: 408-970-3400 Fax: 408-970-3403 www.mellanox.com 1 White Paper Document Number 2007WP Mellanox Technologies Inc Rev 1.30 PICMG 3.2 Advanced Telecommunications and Computing Architecture InfiniBand Technology Delivers
OS/390 Guide to e-business Connectors OS/390 Guide to e-business Connectors: Third Edition October...
OS/390 Guide to e-business Connectors OS/390 Guide to e-business Connectors: Third Edition October 2000 This third edition of the e-business Connectors Guide provides more focus on the Java based connectors and an update on scalability. This white paper is available at
A Practical and Reliable Method for Detection of Nanosecond Intermittency - Tyco Electronics
Anatech and AMP discuss testing of connectors for nanosecond intermittency.
Microsoft Word - In Building Fiber Transport 110629.doc
Last Updated Jun. 8, 11 Application Note www.opticalzonu.com email: info@opticalzonu.com ©2011 Optical Zonu Corporation. All rights reserved. Contents are subject to change without notice. RF over Fiber Optics In‐Building Transport for Distributed Antenna Systems (RFoF DAS) Provided by OPTICAL
TechOnline | USB: Cables and Connectors
USB defines a single connector type for attaching all USB peripherals to the host system. This chapter introduces the primary mechanical elements of USB connectors and cables.
TechOnline | Use a Single Connector for Both the T1/E1 Interface and the Composite Clock of the
This application note describes how a BITS receiver or transmitter and a composite clock receiver or transmitter can be wired to the same signal connector externally. This allows either a DS1/E1 signal or a composite clock signal to be connected to or from the DS3100 through a single connector.
GF22-5124-01.PDF
S/390 Division OS/390 Guide to e-business Connectors: Second Edition December 1999 This second edition of the e-business Connectors Guide provides more guidance on performance expectations. This white paper is available at httpwww.s390.ibm.com/ebusiness/connectors/. Both technical explanations
A new simulation approach to characterizing the mechanical and electrical qualities of a connector
Tyco Electronics predicts the mechanical/electrical performance of low-force connector contacts using elastic plastic contact models.
Refine by Content Type:
Refine by Source:
- www.opticalzonu.com (9)
- www.techonline.com (8)
- www-03.ibm.com (4)
- www.mellanox.com (2)
- www.tycoelectronics.com (2)
- multimedia.mmm.com (1)
